Wednesday, 23 May 2018

Assignment 2: Custom tank for a CB550

Assignment 2: 1:1 Tank build (Hammer not required)

Assignment 2 allowed us to demonstrate all the techniques that we learnt from the Bowl, Torus, Tray and Blister. In addition to this, we incorporated rendering 3D models using Rhino, Autodesk Slicer to create the templates and Adobe Illustrator to laser print the individual pieces.
Materials
Apparatus
3mm annealed aluminium sheet 800 x 600 mm
English Wheel
Permanent markers
Radius Gauge
rags
Roller
Liquid Cut and polish
Hand level shears
Tape
Guillotine







Our group decided the build the Custom tank designed by Andrew Wallace.


Load the model onto 3D modelling software (Either Rhino or Grasshopper)









Transfer 3D model to Slicer 360










Using Adobe Illustrator to laser cut the template














Note: Review slicer before printing the template to avoid these pieces 
Assembly 

Sort out the pieces to help with the assembly.













Note: We had issues with the pieces holding together. We resolved this by using a glue gun to seal the joints



Use tape to create a skin and define the contours



















Use a couple of sheets of paper to trace the outline and contours of the model. use tape to fix it to the model.



Use a radius gauge to determine the curvature.





Mark the different radius onto the paper





Copy to aluminium sheet and cut to size with a guillotine.  The red color represented r125, blue r155, green r275 and black no curve.


Note: Since i was working on the right hand side of the tank, I had to copy the measurement on both sides of the aluminum sheet so that i could see my markings without having to constantly turn the sheet over.






Use roller to quick get the radius. Use English wheel to add the vertical curves




Use the template and the radius gauge to make adjustments 




Spend a weekend trying to fix your part. Take a bite out of it.



Getting closer






I but the top through the bead roller to give a spot for the top piece to fit.

Remove marks with mentholated spirits and use cut and polish to bring out the shine. 










Put it all together







The END




Assignment 3: Reflection